V10 Hulk VISOR TINT DECAL Graphic Sticker Helmet Fits: Icon Shoei Bell HJC Oneal Scorpion AGV
V10 Hulk VISOR TINT DECAL Graphic Sticker Helmet Fits: Icon Shoei Bell HJC Oneal Scorpion AGV by SF at Moto Narede. MPN: V01. Hurry! Limited time offer. Offer valid only while supplies last. 19.5'' x 8'' See through Visor tint graphics are easy to apply and will add an amazing custom look to any helmet. It can be used on a wide variety of
19.5" x 8" See through Visor tint graphics are easy to apply and will add an amazing custom look to any helmet. It can be used on a wide variety of helmet visors. Please measure your visor to insure the item will fit BEFORE buying (See Below). (Graphics should be slightly over sized to allow the whole visor to be covered, then trimmed around the edge with a razor or hobby knife for a perfect seamless fit). We have a large variety of other images. Please feel free to check our other designs. You will receive the design shown in the title and main picture above. Helmet and visor NOT included.
The measurements of this item are 19.5" x 8" Which will fit MOST visors. Please measure your visor BEFORE ordering to make sure the size provided will work. We can also slightly alter the sizes to suite your needs. Please contact us in an AMAZON message with the size you would need it produced and we will contact you back and let you know if we can make it that size. There is usually no extra charge to alter a size (Even if it is bigger). WE CAN NOT ACCEPT RETURNS OR EXCHANGES DUE TO SIZING ISSUES.
(1) Clean surface of any dust or debris. Alcohol is recommended. (make sure surface is dry) (2) Place decal on a flat surface face down and peel off paper backing, *IMPORTANT* Avoid letting the decal stick to its self (3) Tack down just the center of the decal from top to bottom with your finger, and let the left and right area hang without touching. Start with one side, while holding the decal away from touching the visor (but still tacked down in the middle) Lightly heat the decal with a heat gun or hair dryer. When the decal is warm keep the decal tight by pulling up and down on it at the same time as you wrap it around the side. Repeat on the other side (4) Trim the excess material off along the edge of the visor with a razor or hobby knife.
Features & Highlights
- Helmet Visor Decal Fits: Icon Shoei Bell HJC Oneal Scorpion AGV & More
- Universal Size (See sizing below)
- Easy to apply. Removable without damage
- Does NOT include helmet or visor (Decal Only)
- Peel and stick application
|Item Weight:||0.06 pounds|
|Item Size:||19.5 x 8 x 8 inches|
|Package Weight:||0.25 pounds|
|Package Size:||6 x 6 x 6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by SF, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By HJC Helmets
mpn: 15766431, ean: 0923269252792,
Outlaw Universal 3 Snap-Button Visor with Flip-up Dark Tint ShieldHelmet Fitment:- Helmet Sold Separately- Color : Black Visor with Dark Tint ShieldFlip Up Clear Shield. Recommended for Daytime Use only. Height of Shield : 6 1/4 Inches. Width of Shie...
mpn: 35-00-00, ean: 0845468057223,
Scorpion Peak Visor Vx-35 Motorcycle Helmet AccessoriesHelmet Accessories. Size: One Size. ...
mpn: 011502, ean: 4530935000654,
Arai SAQ FaceshieldFits the following Arai Full Face helmets: RX7 Corsair, Quantum 2, Profile, Vector, Quantum/f, Quantum/s. Available in clear, light smoke, dark smoke, amber, yellow, and blue. ...
By HJC Helmets
Replacement flip-down sun shield for HJC IS-2 and HJC IS-Cruiser Helmets....
mpn: KV17L0N2-001-NFOR, ean: 8026656404605,
Genuine AGV replacement faceshield for the AGV AX-8 Dual Sport and AX-8 Dual Sport EVO helmets. Shield includes Anti-Scratch and Anti-Fog coating. **NOTE: Images are provided by manufacturer and believed to be correct. However, please choose your shi...
By Daytona Helmets
Meets Or Exceeds DOT StandardsThe Smallest DOT Half Shell Helmet Ever Made!!With Four Different Shell Sizes You're Sure To Get That Proportionate Fit!!100% LeatherThe Finest Cost Us More, But Outlasts And Outlooks The OthersWe Use The Finest Lamb Hid...
Features: Type: Motorcycle Helmet Anti-scratch Visor Material: PC Color: Silver, Colorful, Tea Color, Transparent (for optional) Helmet Style: Full Face Gender: Unisex Function: Anti-scratch Shield, UV Protrcted Suitable For: 316 902 AGV K5 K3SVSpeci...
mpn: MFC-VISOR-GXT-BUBBLE_SMOKE, ean: 0606345739584,
Item describtion: Condition: 100% brand new Fits: For helmet with 3-snap working system Net Weight: About 230g Material: Strengthened Polycarbonate Available Colors: Clear/Smoke/Mirrored Manufacturing Area: Taiwan Feature: Made of high quality of Pol...
mpn: 1, ean: 0637045946798,
Woljay Off Road Motorcycle Modular Helmet Visor ShieldPlease check the shield mounting before ordering.. Please feel free contact us if you are not sure the model would fit.. We are not responsible for return shipping cost if the shield is incompatib...